I have just downloaded 2.0.3 for Mac OSX Lion from source forge. When I try to start, LibreCAD crashes immediately. This is the Log from the system.log: Jan 12 16:57:49 Lothars-iMac ReportCrash158. Developed by Respawn Entertainment, the game fuses elements from video games, class-based shooters and battle royale games, and games with unfolding storylines. You can play this game with.
- The loop-back test: put a paper clip in the female DB9 connector which would go on the alix/apu board at pins 2 and 3, then you should receive typed characters in your terminal emulation program. This tests the terminal emulation program, the USB-RS232 and the serial cable and this test MUST work before blaming any board attached to it. But this test does not prove whether or not a null-modem cable is used.
- The most common mistake people make is not using a null-modem cable: If you have a multimeter, check that the pins 2 and 3 are crossed. Do NOT use gender changers!
- The default baud rate for alix boards is 38400,8n1 and for apu boards 115200,8n1.
- The recommended terminal emulation program for any platform is PuTTY.
- Pressing the button S1 while powering up, temporarily enables a previously in the BIOS disabled serial console.
- To test if an apu board boots up, even if there is no serial console, boot it with TinyCore and a beep should be heard after about 30s-40s.
![Mac Mac](https://media.rawg.io/media/resize/420/-/screenshots/8c3/8c34c9212b70615b2a18a92fa8677c06.jpg)